How to choose the right recessed LED Strip Light?


How to choose the right recessed LED Strip Light?

strip light, led strip lights

What is a recessed LED Strip Light?

Recessed LED Strip Lights are luminaires for enjoying diffuse light. They are typically installed in ceilings and are made to replace incandescent or halogen fixtures. Unlike downlights, which are used for general ceiling lighting and have a wider diffusion angle, LED Strip Lights to have a smaller diffusion angle, giving them a precise contrast between shadow and light. They are perfect for accent lighting, for example for paintings or works of art.

Where can we install them?

A recessed LED Strip Light can be installed on the ceiling in any room for general lighting but most of the time they are used as accent lighting. The intensity of light depends on the room but can be easily adjusted if you choose dimmable LED Strip Lights. You can also install them in entrances, hallways or even in your bathroom (make sure you have a fixture with the right IP rating). Another possibility may be to install them inside your furniture or your dressing room.


You can install them almost everywhere!

Which strip should I use it?

Most of the time, recessed LED Strip Lights include a light, however, some recessed spots are excluded from light sources. This solution allows you to buy the light you want, leaving you free choice of power, color code or other options. Most of them allow integrating a GU10 light. To see all our recessed spots without a light source, clickhere.


Comments

  1. Smith2 February 2021 at 21:00

    Skyled Engineering Pvt Ltd is The Best Alternate Energy Solutions
    Provider in Pakistan. We are Sole and Exclusive Distributor of Honeywell LED Lighting in Pakistan.
    Get a quote today LED Lights Pakistan
    Thanks for sharing the informative post.
    LED Lights Pakistan

    ReplyDelete

Post a Comment

Popular posts from this blog

How to replace your low energy lights with LED's?

How to replace your low energy lights with LEDs? This article is meant to be a practical and easy guide to comparing lighting technologies and their respective powers. Sometimes it is difficult to choose the correct equivalence between our old and new lamps, concretely when we try to change a low energy light for an LED light. We hope this guide will help you. You will find below several tables that group the equivalences between the various technologies. We obviously compare LED technology, the latter being the most current. At the end of this article, you will find a table comparing all existing technologies. Do these tables mean that you cannot choose a Watt above or below? Not. These tables are examples that allow you to understand the equivalences between technologies, but you are free to choose the Watts you want. Low Consumption Light (CFL) vs. LED Light The equivalence between different lighting technologies is often complicated to understand because it is not indic...
Read more

How to choose the right number of lumens for each piece?

Image
How to choose the right number of lumens for each piece? With LED lighting, it is essential to know what light is needed in a room. In fact, it can be difficult to choose the brightness according to a room. To do this, you need to know the number of lumens required. What is the lumen? The lumen indicates the total amount of light emitted by a light source, regardless of its direction. This indicator is crucial for determining the effectiveness of a luminaire. More specifically, it indicates the efficiency of a light source when it converts power into light. This is called the lumen per watt (Lm / W). With LED lights, this value is higher because they need less power to generate the same amount of light as non-LED lighting. With the same characteristics, a halogen bulb will give 18 Lm / W whereas an LED will give 113 Lm / W. The higher the ratio, the more effective the product. Finally, the lumen corresponds to the brightness! How many lumens per room? In ord...
Read more

Why choose luminaires equipped with DALI?

Image
Why choose luminaires equipped with DALI? In recent years, the management of lighting systems has made enormous progress. The time we had to press a switch to light a lamp is over. Today, advanced systems such as DALI offer several advantages such as automatic lighting or switching off of light, or the localization of malfunctions. What does DALI mean? DALI is an acronym for Digital Addressable Lighting Interface, which could be translated as a digitally addressable lighting interface. It is an international standard for communication between controllers and lighting sources, allowing the management of the entire lighting system. It has been designed by the biggest manufacturers on the market: Philips, Crest led, but it is compatible with a good number of products from other manufacturers. What are the advantages? The DALI system allows total control of the lighting. Thus, it is possible to group or isolate a certain luminaire and memorize this certain parameter. ...
Read more