Why choose a Led high bay Light?


Why choose a Led high bay Light?


high bay light, led high bay light

The choice of a suitable high bay light depends on several factors. For example, it is important to consider the height of the ceiling: the higher your ceiling, the more light you will need and the greater the light output. You also need to think about the products you will be lighting: if you light a warehouse, you will need a dust-proof fixture.

What are the advantages of high bays lights?


IP65 or more:

The IP rating indicates whether the fixture is protected against dust and water. An IP65 indicates that the luminaire is perfectly protected against water and dust. As a result, your fixture will require little maintenance and will save you money.

Quick return on investment:

Old high bays lights used 250W or 400W discharge lamps and ballast.  it's LED high bays consume 50%less energy. Thus, a return on investment is guaranteed quickly. You do not have to use ballast anymore. On the other hand, high bays lights have a lifespan up to 8 times longer, about 80,000 hours of use, compared with 10,000 for discharge lamps.

No wear:

High bays lights are resistant to ammonia and do not undergo corrosion, so there is no maintenance to ensure.

Suitable for high ceilings:

LED high bays lights are all suspended luminaires, so they are suitable as simple lighting for warehouses, halls, barns, and factories with a height of 5 to 12 meters.

Comments

  1. hassaan12 October 2019 at 02:54

    Very good work on Led high bay light. Keep it on.

    ReplyDelete
  2. OM2 December 2021 at 22:23

    Thanks for sharing this information. I really like your blog post very much. You have really shared a informative and interesting blog post with people.
    Led High Bays

    ReplyDelete

Post a Comment

Popular posts from this blog

How to replace your low energy lights with LED's?

How to replace your low energy lights with LEDs? This article is meant to be a practical and easy guide to comparing lighting technologies and their respective powers. Sometimes it is difficult to choose the correct equivalence between our old and new lamps, concretely when we try to change a low energy light for an LED light. We hope this guide will help you. You will find below several tables that group the equivalences between the various technologies. We obviously compare LED technology, the latter being the most current. At the end of this article, you will find a table comparing all existing technologies. Do these tables mean that you cannot choose a Watt above or below? Not. These tables are examples that allow you to understand the equivalences between technologies, but you are free to choose the Watts you want. Low Consumption Light (CFL) vs. LED Light The equivalence between different lighting technologies is often complicated to understand because it is not indic...
Read more

How to choose the right number of lumens for each piece?

Image
How to choose the right number of lumens for each piece? With LED lighting, it is essential to know what light is needed in a room. In fact, it can be difficult to choose the brightness according to a room. To do this, you need to know the number of lumens required. What is the lumen? The lumen indicates the total amount of light emitted by a light source, regardless of its direction. This indicator is crucial for determining the effectiveness of a luminaire. More specifically, it indicates the efficiency of a light source when it converts power into light. This is called the lumen per watt (Lm / W). With LED lights, this value is higher because they need less power to generate the same amount of light as non-LED lighting. With the same characteristics, a halogen bulb will give 18 Lm / W whereas an LED will give 113 Lm / W. The higher the ratio, the more effective the product. Finally, the lumen corresponds to the brightness! How many lumens per room? In ord...
Read more

Why choose luminaires equipped with DALI?

Image
Why choose luminaires equipped with DALI? In recent years, the management of lighting systems has made enormous progress. The time we had to press a switch to light a lamp is over. Today, advanced systems such as DALI offer several advantages such as automatic lighting or switching off of light, or the localization of malfunctions. What does DALI mean? DALI is an acronym for Digital Addressable Lighting Interface, which could be translated as a digitally addressable lighting interface. It is an international standard for communication between controllers and lighting sources, allowing the management of the entire lighting system. It has been designed by the biggest manufacturers on the market: Philips, Crest led, but it is compatible with a good number of products from other manufacturers. What are the advantages? The DALI system allows total control of the lighting. Thus, it is possible to group or isolate a certain luminaire and memorize this certain parameter. ...
Read more